---
title: "Cross-border payments explained: how they work, why they are slow and expensive, and what is changing"
seoTitle: "Cross-border payments explained: how they work (2026)"
description: "How cross-border payments work, why they are slow and costly, the G20 targets, BIS cost data and the FSB's November 2026 report, plus practical options."
date: "2026-11-16"
updated: "2026-11-16"
category: "payments"
author: "BlindPay Team"
faq:
  - q: "Why are cross-border payments so expensive?"
    a: "Most of the cost is hidden in the exchange rate, not in the wire fee. BIS Working Paper 1385 (October 2026) finds retail wires at large global banks carry FX markups of 200 to 400 basis points even on the most liquid currency pairs, before any explicit fees. Several intermediaries each take a margin, and the sender often cannot see the total up front."
  - q: "How long do international payments take?"
    a: "It depends on the route. Swift reports that about 90% of payments on its network reach the destination bank within an hour, but only 43% reach the end customer's account in that time (Swift, October 2024). Bank-to-bank correspondent payments are often described as settling in one to three business days. Local instant rails such as Pix credit the recipient in seconds to minutes."
  - q: "What is correspondent banking?"
    a: "Correspondent banking is an arrangement where a bank holds an account at another bank so it can send and receive money in a currency or country it does not serve directly. When two banks have no direct link, the payment hops through one or more correspondents, and each hop adds time, cost and a chance of delay."
  - q: "What are the G20 cross-border payment targets?"
    a: "The G20 set targets for end-2027: retail cross-border payments at a global average cost of no more than 1% with no corridor above 3%, and 75% of payments available to the recipient within one hour with the rest within one business day. For remittances, the target is a global average cost of at most 3% for sending $200 and no corridor above 5% by 2030."
  - q: "What is the cheapest way for a business to pay abroad?"
    a: "There is no single cheapest route, because cost depends on the corridor, the amount and the currency pair. Run the delivered-amount test: request a full quote from each option for the same payment and compare what the recipient receives after fees and FX. Local rails at the last mile usually remove the most hops, so ask every provider which rail it uses."
  - q: "Can stablecoins make cross-border payments cheaper?"
    a: "Sometimes. BIS Working Paper 1385 breaks stablecoin routes into four costs: the FX leg, exchange trading fees, network gas and fiat on-ramp and off-ramp fees. FX cost is close to zero for major currencies, and gas is usually well below a dollar. The all-in result still depends on the off-ramp, so compare delivered amounts rather than assuming."
---

A cross-border payment moves value between two countries, usually through a chain of banks that exchange messages first and settle money later. It is slow and expensive because each bank in the chain adds time, fees and an exchange-rate margin. The G20 wants the average retail cost at no more than 1% by end-2027, and progress is gradual and uneven.

This guide covers how the system works and what is changing, as of November 2026. It builds on our explainers of [what a payment processor is](/resources/more/what-is-a-payment-processor), [payment processing fees](/resources/more/payment-processing-fees-explained) and [payment settlement times](/resources/more/payment-settlement-times).

**Key takeaways**

- A cross-border payment is two things: a message that tells banks what to do, and the movement of money that settles it. They travel on different paths and at different speeds.
- The biggest cost is usually the exchange-rate markup. BIS Working Paper 1385 puts it at 200 to 400 basis points at large global banks, before explicit wire fees.
- The G20 targets are 1% average retail cost and 75% of payments within an hour by end-2027. The FSB 2026 report says progress is gradual and uneven.
- Fintech providers, local rails and stablecoin-funded routes can cut hops, but you should compare the delivered amount, not the headline fee.

## How do cross-border payments work?

A cross-border payment works in four steps: the sender's bank sends a payment instruction, the banks agree who pays whom, the currency is converted, and the recipient's bank credits the account. The instruction and the money do not move together. The instruction travels as a message in seconds, and the money settles later through accounts the banks hold with each other.

Many bank payments run on the Swift network, which carries messages, not funds. When two banks have no direct relationship, they use a correspondent bank, which is a bank that holds an account for another bank so it can handle a currency or country the first bank does not serve. The accounts banks hold with each other for this purpose are called nostro and vostro accounts, explained in [nostro and vostro accounts explained](/resources/more/nostro-vostro-accounts-explained).

1. The sender asks their bank to pay a recipient abroad, in the sender's or the recipient's currency.
2. The bank converts the currency, or passes the instruction on to a bank that will.
3. One or more correspondent banks pass the message along and move balances between their accounts.
4. The recipient's bank receives the funds and credits the account, often after its own compliance checks.

## Why are cross-border payments slow?

Cross-border payments are slow mainly because of the last mile and the checks along the way, not because the message is slow. Swift reported in October 2024 that about 90% of payments on its network reach the destination bank within an hour, while only 43% reach the end customer's account within an hour ([Swift press release, 17 October 2024](https://www.swift.com/news-events/press-releases/swift-cross-border-payment-processing-speed-stretches-further-ahead-g20-target)). BIS Working Paper 1385 repeats the 90% figure and notes that most delay sits in the last mile.

The causes stack up. Each hop runs its own sanctions and anti-money-laundering checks. Banks cut off at different times and in different time zones, so a payment can wait for the next banking day. Correspondent banking is often described as settling on a T+1 to T+3 basis, according to the BIS paper. Our deeper breakdown is in [why cross-border payments are slow](/resources/more/why-are-cross-border-payments-slow).

## Why are cross-border payments expensive?

They are expensive because several parties take a margin and the largest one, the exchange-rate markup, is hard to see. According to [BIS Working Paper 1385](https://www.bis.org/publications/working-paper-1385-competing-rails-crossborder-payments-banks-fintechs-and-stablecoins.pdf) (October 2026), retail FX wires at large global banks carry markups of 200 to 400 basis points even on the most liquid pairs. The paper treats that as a lower bound on total cost because it excludes explicit wire fees, and it gives no figure for those fees.

The same paper compares providers. All figures below come from it, and the base is US-outbound payments.

| Route (BIS WP 1385) | Typical cost | Notes |
| --- | --- | --- |
| Large global bank, retail FX wire | 200 to 400 bps markup, plus fees | Markup alone, even on liquid pairs |
| Fintech money transfer operator, $200 payment | About 200 bps (Tier 1) to nearly 300 bps (Tier 4) | Fixed costs weigh more on small amounts |
| Fintech money transfer operator, $10,000 payment | About 40 to 60 bps (Tier 1 and 2), 80 to 130 bps (Tier 3 and 4) | Scale economies |
| B2B fintech platform wire | About 83 bps (Tier 1), about 96 bps (Tier 2), plus a fixed $8 wire fee | Tier 3 and 4 above 300 bps |

A basis point (bps) is one hundredth of a percent, so 100 bps is 1%. The tiers group currencies by liquidity, with Tier 1 the most liquid. For more on how fees stack up, see [cross-border payment costs beyond the rail](/resources/more/cross-border-payment-cost-beyond-the-rail).

### What does that mean for a $10,000 payment?

This is an illustrative calculation using the BIS ranges, not a quote from any provider. On $10,000, a 200 to 400 bps markup is $200 to $400 before wire fees. A fintech route at 40 to 60 bps is $40 to $60. The G20's 1% average target equals $100.

## What are the G20 targets?

The G20 targets, set through the Financial Stability Board (FSB), aim to make cross-border payments cheaper, faster, more accessible and more transparent. The table lists them as shown on the [FSB targets page](https://www.fsb.org/work-of-the-fsb/financial-innovation-and-structural-change/cross-border-payments/g20-targets-for-enhancing-cross-border-payments-2/) (last updated 13 October 2026).

| Target | Segment | Goal | Deadline |
| --- | --- | --- | --- |
| Cost | Retail payments | Global average of no more than 1%, no corridor above 3% | End-2027 |
| Cost | Remittances | Global average of no more than 3% for sending $200, no corridor above 5% | 2030 |
| Speed | Wholesale, retail, remittances | 75% of payments within one hour, the rest within one business day | End-2027 |
| Access | Retail and remittances | Every end user has at least one electronic option (retail); over 90% of people who want to send or receive have one (remittances) | End-2027 |
| Transparency | All providers | Disclose total cost, expected delivery time, status tracking and terms | End-2027 |

The FSB sets no wholesale cost target. Our summary of the scorecard is in [G20 cross-border payment targets for 2027](/resources/more/g20-cross-border-payment-targets-2027).

## What is changing?

The FSB published its [consolidated progress report for 2026](https://www.fsb.org/2026/11/g20-roadmap-for-enhancing-cross-border-payments-consolidated-progress-report-for-2026/) on 16 November 2026. Its central findings are that the FSB, the Committee on Payments and Market Infrastructures and partners have largely completed the international policy work of the 2020 Roadmap, and that progress on cost, speed, access and transparency is gradual and uneven across regions and segments. We do not quote its figures here, because the report page does not state them in text.

Three themes drive the work now: interoperability and extension of payment systems, legal, regulatory and supervisory frameworks, and cross-border data exchange and message standards. Meanwhile, the BIS paper describes competing rails. Fintechs and, in some corridors, stablecoins are cutting the number of hops. Its stablecoin cost model has four parts: the FX leg, exchange trading fees, network gas and fiat on-ramp and off-ramp fees. FX cost is close to zero for major currencies, and gas is well below one dollar on Ethereum and a few cents or less on other chains. Liquidity is the limit: about $185 million a day of USD stablecoin against EUR trades on centralized exchanges, versus about $2.7 trillion a day in traditional EUR FX turnover.

## How do you pick a route for a business payment?

Pick the route by the amount the recipient receives, the speed they need and the proof you need to keep. Use this list for each corridor.

1. Write down the corridor, the amount and the currency pair, for example $10,000 USD to BRL.
2. Ask each provider for a full quote for that exact payment, including FX rate, fees and any recipient-side charges.
3. Compute the delivered amount: what lands in the recipient's account. This is the only comparison that holds up. See [cost per delivered dollar](/resources/more/cost-per-delivered-dollar).
4. Check the last mile. Does the payment end on a local rail such as Pix or SPEI, or does it hop through correspondents?
5. Check tracking and fees disclosure. Look for a status you can follow, and a total cost before you commit.
6. Check compliance. Who runs sanctions screening and travel rule checks, and how do they handle requests for information?
7. Send a small test payment before you move volume.

## What practical options do businesses have?

There are four practical options, and they differ in hops, speed and transparency. Our [SWIFT vs local rails vs stablecoin comparison](/resources/more/swift-vs-local-rails-vs-stablecoin) goes further on each.

| Option | How it moves money | Strength | Watch for |
| --- | --- | --- | --- |
| Bank wire over Swift | Message plus correspondent settlement | Reaches almost any bank | FX markup and unclear total cost |
| Fintech transfer provider | Local payout networks in several countries | Lower cost on large amounts | Coverage by corridor |
| Local rail at the last mile | Domestic instant or bank rail in the destination country | Fast, cheap final leg | Needs a funded route to reach the rail |
| Stablecoin-funded payout | Dollars move as a stablecoin, then convert to a local bank rail | Fewer hops, quote before you commit | Off-ramp quality and compliance |

## How BlindPay approaches cross-border payments

BlindPay uses stablecoins for the cross-border leg and local rails for the last mile, with compliance inside the same API call. Local rails include Pix in Brazil, SPEI in Mexico, ACH and RTP in the United States and SEPA in Europe. For supplier payments in more than 100 countries, BlindPay sends SWIFT (POBO/COBO) payments, which are payments and collections on behalf of others, with UETR tracking and MT103 confirmations.

BlindPay states on its [global payments page](/global-payments) that businesses can "save up to 80% on global transfers". Treat that as a BlindPay marketing claim, not a benchmark. As an illustration only: if a bank wire cost a business $300 in fees and markup on a payment, a saving of 80% would leave $60 of cost. Your result depends on the corridor, amount and rail, and the live quote before execute shows the real number.

BlindPay combines a monthly plan (platform access) with per-transaction fees that vary by rail and network and are disclosed only in the live quote before execute. Plans are listed on the [pricing page](/pricing). Documented timings are Pix instant (up to 5 minutes to confirm), SPEI instant (up to 10 minutes), RTP instant, and SWIFT send about 5 business days ([BlindPay docs overview](/docs/overview)). To go deeper on paying into Latin America, read [how to send payments to Latin America](/resources/more/send-payments-to-latin-america).

## Methodology and sources

All sources were checked in November 2026. External sources:

- [FSB, G20 targets for enhancing cross-border payments](https://www.fsb.org/work-of-the-fsb/financial-innovation-and-structural-change/cross-border-payments/g20-targets-for-enhancing-cross-border-payments-2/)
- [FSB, G20 Roadmap consolidated progress report for 2026, published 16 November 2026](https://www.fsb.org/2026/11/g20-roadmap-for-enhancing-cross-border-payments-consolidated-progress-report-for-2026/)
- [BIS Working Paper 1385, Competing rails for crossborder payments: banks, fintechs, and stablecoins (Du, Huang, Scharfstein, October 2026)](https://www.bis.org/publications/working-paper-1385-competing-rails-crossborder-payments-banks-fintechs-and-stablecoins.pdf)
- [Swift cross-border payment speed release, 17 October 2024](https://www.swift.com/news-events/press-releases/swift-cross-border-payment-processing-speed-stretches-further-ahead-g20-target)

BlindPay sources: the [docs overview](/docs/overview), the [global payments page](/global-payments) and the [pricing page](/pricing). Dollar examples are illustrative.

*This article is for general information only and is not legal, tax, or compliance advice.*
