Skip to content

Acquirer vs issuer: the four-party card model explained with a $100 example

The issuer serves the cardholder, the acquirer serves the merchant, the network connects them. Follow a $100 card sale and see where each fee goes.

The issuer represents the cardholder: it issues the card, extends credit and approves or declines the payment. The acquirer represents the merchant: it receives the payment, pays the merchant and pays interchange to the issuer. The card network connects the two and moves the messages and settlement between them.

This guide follows one $100 card sale through the four parties and shows where each fee goes, using Visa's table effective October 24, 2026. The acquirer markup and network assessment are labelled assumptions, as of November 2026. BlindPay publishes this guide.

Key takeaways

  • Issuer and acquirer are two sides of one transaction. Stripe's guide says the issuer "represents the customer" and the acquirer "represents the business."
  • On a $100 online sale with a basic Visa credit card, interchange is $1.99 (1.89% + $0.10 on Visa's table effective October 24, 2026).
  • In the illustrative example below, the merchant's total cost is $2.53 and the merchant receives $97.47. Only the interchange rate is verified. The network assessment and acquirer markup are assumptions.
  • The same sale in person, on the lowest-cost Visa tier, costs about $0.46 less in interchange: 1.43% + $0.10 is $1.53.
  • Premium cards raise the interchange line. A card-not-present Infinite card with qualifying spend is 2.60% + $0.10, or $2.70 on $100.

What is an issuer?

An issuer is the bank or financial institution that gives a cardholder the card, extends the credit or holds the deposit account behind it, and approves or declines each payment. It represents the customer in the transaction.

Stripe's guide describes the issuer as the institution that gives the cardholder a payment card, and says it earns mainly interchange, which is a percentage of each transaction plus a fixed fee paid by the acquirer, along with interest on credit balances (Stripe, "Acquirer vs. issuer", updated August 21, 2026). On credit cards, the issuer takes the credit risk of the cardholder not paying. That is part of why it charges for the service.

The first 6 to 8 digits of a card number, the bank identification number (BIN), identify the issuer, the network and the card level. When a merchant sends an authorization request, the network uses the BIN to find the issuer to ask.

What is an acquirer?

An acquirer is the bank or financial institution that gives a merchant the tools to accept cards, receives the payment from the issuer through the card network and deposits it to the merchant's account. It represents the business.

The acquirer earns a merchant discount rate or processing margin on top of base interchange and card network fees, per Stripe's guide. It also carries the merchant-side risk. Visa says the acquirer remains responsible for sellers and for any entities operating between the acquirer and the seller (Visa, "Beyond the Acquirer", February 15, 2024). For a broader definition, see the pillar guide, what is merchant acquiring.

Many businesses never sign with an acquirer directly. A payment service provider or payment facilitator contracts on their behalf, as explained in merchant acquirer vs payment processor vs gateway vs PSP.

How does a $100 card sale move between the four parties?

The cardholder pays $100. The issuer approves and later sends $100 minus interchange through the network. The network takes its assessment, and the acquirer keeps its markup and deposits the rest with the merchant. In the example below, the merchant ends with $97.47.

Here is the flow, step by step:

  1. Cardholder pays. A customer pays $100 online with a basic Visa consumer credit card.
  2. Merchant requests authorization. The merchant's checkout sends the request to its acquirer.
  3. Network routes. The card network identifies the issuer from the BIN and passes the request on.
  4. Issuer approves. The issuer checks credit and fraud signals and approves. The answer returns to the merchant in seconds.
  5. Clearing and settlement. The issuer keeps its interchange and sends the remaining $98.01 through the network. The network collects its assessment. The acquirer keeps its markup and pays the merchant.
StepWho actsWhat moves
1. SaleCardholder and merchant$100 charged to the card
2. AuthorizationMerchant, acquirer, network, issuerData only, no money; the issuer places a hold
3. InterchangeIssuerIssuer keeps $1.99; $98.01 goes onward
4. Network assessmentCard networkNetwork collects $0.14 (assumed)
5. Acquirer markupAcquirerAcquirer keeps $0.40 (assumed)
6. PayoutAcquirer to merchantMerchant receives $97.47

The Federal Reserve Bank of Philadelphia described the same order of deductions in 2007: the issuer sends the remainder back through the network, the network deducts its dues and assessments, and the acquirer nets out its fee before remitting the balance to the merchant (Philadelphia Fed, October 2007). Its example used a 1.5% interchange rate, 0.10% network fee and 0.40% acquirer fee on a $100 sale. The rates here are current ones. How the flow works in time is covered in how a card payment works.

Where do interchange, network fees and acquirer markup go?

Interchange goes to the issuer, network fees go to Visa or Mastercard, and the markup goes to the acquirer or processor. The merchant pays all three as one blended charge. Chargeflow's November 2026 guide lists the same recipients and notes that the markup is the only layer a merchant can negotiate (Chargeflow, "Interchange fees", published November 8, 2026).

Here is the worked example. It is illustrative.

Inputs for the $100 sale (illustrative):

  • Interchange: Visa consumer credit, card not present, Product 1, All Other tier, 1.89% + $0.10, from Visa's table effective October 24, 2026 (Visa USA interchange reimbursement fees). This is a verified rate.
  • Network assessment: 0.14% of the sale. This is an assumption for illustration. Published sources disagree on current network assessment figures, and we could not confirm them against Visa's or Mastercard's own schedules, so treat 0.14% as a placeholder.
  • Acquirer markup: 0.30% + $0.10. This is an assumption. Markups are negotiated and vary by provider.
LineCalculationAmount
Interchange (to the issuer)1.89% of $100 + $0.10$1.99
Network assessment (to the network)0.14% of $100 (assumed)$0.14
Acquirer markup (to the acquirer)0.30% of $100 + $0.10 (assumed)$0.40
Total cost to the merchant$2.53
Merchant receives$100 minus $2.53$97.47

The total is 2.53% of the sale. Of the $2.53, 79% is interchange. That share is a result of the inputs, not a general rule. We computed every figure in code.

Changing the card or channel changes only the interchange line in this example, with the assumed assessment and markup held constant:

Visa consumer credit tier (US, October 24, 2026)Interchange on $100Total costMerchant receives
Card present, lowest tier (1.43% + $0.10)$1.53$2.07$97.93
Card not present, All Other (1.89% + $0.10)$1.99$2.53$97.47
Card not present, Signature (2.50% + $0.10)$2.60$3.14$96.86
Card not present, Infinite, spend qualified (2.60% + $0.10)$2.70$3.24$96.76

Visa's own words matter here: merchants do not pay interchange reimbursement fees, they pay a merchant discount to their financial institution. The full breakdown by layer is in merchant acquiring fees: interchange, scheme fees and acquirer markup.

Debit differs. Visa uses separate debit tables, and the US cap on large-issuer debit interchange was in legal limbo in November 2026 after a federal appeals court affirmed a ruling vacating the Federal Reserve's fee standard (ABA Banking Journal, November 3, 2026). This example uses consumer credit only.

Can one bank be both issuer and acquirer?

Yes. Stripe's guide states that the same financial institution can act as both issuer and acquirer, serving cardholders as one and merchants as the other. The two roles are still separate functions with separate customers and contracts.

The card network still sits in the middle for most transactions. Whether a bank's own cardholder paying at a merchant of the same bank changes the routing or fees depends on network rules and bank agreements that this guide does not cover. Do not assume interchange disappears when issuer and acquirer match.

Why do card-not-present sales cost more than in-person sales?

Networks price card-not-present (CNP) sales higher than card-present ones. In Visa's table effective October 24, 2026, a basic consumer credit card is 1.43% + $0.10 in person and 1.89% + $0.10 online, a 0.46 percentage point gap.

The usual explanation is higher fraud exposure when the physical card is not read and a chip or PIN is not checked. The table itself only shows the price difference. A basic card in person also needs the merchant to meet performance conditions for the lowest tier, which is why Visa lists "Product 2" rates as the fallback at 1.51% + $0.10 for the same basic card. On $100, that fallback adds $0.08 compared with the lowest tier.

Chargeflow's summary puts it plainly: online and keyed sales cost more than chip or tap sales. To lower the gap, see the series guides on how to read a merchant processing statement and how to reduce card processing fees.

What about three-party networks?

In a three-party network, one company acts as the network, the issuer and the acquirer. American Express and Discover work this way, unlike Visa and Mastercard, where banks play the issuer and acquirer roles.

The Philadelphia Fed paper explains that American Express and Discover do not use a bank-member structure. They keep the contract with cardholders as issuers and have direct relationships with the merchants that accept their cards as acquirers, so the issuer, acquirer and network functions are collapsed into one entity. The paper is from 2007, so use it for structure, not for current rates.

Read your merchant agreement to see how these cards are priced, since they follow their own terms rather than the Visa table above.

Paying sellers and contractors across borders is a different cost from card acceptance. See cross-border payouts for marketplace sellers and contractors.

Methodology and sources

The $100 example was computed with a short Python script from the inputs listed above. All sources were read in November 2026.

Continue with merchant acquiring fees: interchange, scheme fees and acquirer markup for the full cost stack.

This article is general information, not legal, tax, or financial advice.

FAQ

One API.
Multiple payment rails.

Blind Pay, Inc. (“BlindPay”) is a United States-based financial technology and payments infrastructure company, incorporated in the State of Delaware on May 2, 2024. BlindPay is duly registered as a Money Services Business (“MSB”) with the Financial Crimes Enforcement Network (“FinCEN”) under registration number 31000277566153. BlindPay is not a state-licensed money transmitter and does not, in its own capacity, engage in regulated money transmission services. All such regulated activities are conducted exclusively through, and under the licenses of, duly authorized financial institution partners. BlindPay's role is limited to providing financial technology, virtual account management, payment processing, and related payments infrastructure services that facilitate payment flows and account functionalities. These services are provided in coordination with its licensed partners and in compliance with applicable federal MSB requirements and relevant state regulatory frameworks.

Blind Pay, LLC (“BlindPay”) is a Delaware limited liability company formed on June 24, 2025. BlindPay is duly registered as a Money Services Business (“MSB”) with the Financial Crimes Enforcement Network (“FinCEN”) under registration number 31000318334247 and is listed in the Nationwide Multistate Licensing System (“NMLS”) under NMLS ID #2745309.

BLIND PAY SOCIEDADE PRESTADORA DE SERVIÇOS DE ATIVOS VIRTUAIS LTDA. (“BlindPay”) is a Virtual Asset Service Provider (“VASP”) operating in Brazil. The company is presently completing the regulatory adaptation process required of Virtual Asset Service Provider Companies (SPSAV) under Central Bank of Brazil Resolution No. 520/2025, and remains subject to the transitional regime set forth in Article 88 of that Resolution. Registered address: Avenida Princesa Isabel, nº 15, Sala 1405, Edifício Martinho de Freitas, Centro, Vitória/ES, 29010-361.

BlindPay is a stablecoin API that enables individuals and businesses to move money worldwide.