Skip to content

Cross-border payments explained: how they work, why they are slow and expensive, and what is changing

How cross-border payments work, why they are slow and costly, the G20 targets, BIS cost data and the FSB's November 2026 report, plus practical options.

A cross-border payment moves value between two countries, usually through a chain of banks that exchange messages first and settle money later. It is slow and expensive because each bank in the chain adds time, fees and an exchange-rate margin. The G20 wants the average retail cost at no more than 1% by end-2027, and progress is gradual and uneven.

This guide covers how the system works and what is changing, as of November 2026. It builds on our explainers of what a payment processor is, payment processing fees and payment settlement times.

Key takeaways

  • A cross-border payment is two things: a message that tells banks what to do, and the movement of money that settles it. They travel on different paths and at different speeds.
  • The biggest cost is usually the exchange-rate markup. BIS Working Paper 1385 puts it at 200 to 400 basis points at large global banks, before explicit wire fees.
  • The G20 targets are 1% average retail cost and 75% of payments within an hour by end-2027. The FSB 2026 report says progress is gradual and uneven.
  • Fintech providers, local rails and stablecoin-funded routes can cut hops, but you should compare the delivered amount, not the headline fee.

How do cross-border payments work?

A cross-border payment works in four steps: the sender's bank sends a payment instruction, the banks agree who pays whom, the currency is converted, and the recipient's bank credits the account. The instruction and the money do not move together. The instruction travels as a message in seconds, and the money settles later through accounts the banks hold with each other.

Many bank payments run on the Swift network, which carries messages, not funds. When two banks have no direct relationship, they use a correspondent bank, which is a bank that holds an account for another bank so it can handle a currency or country the first bank does not serve. The accounts banks hold with each other for this purpose are called nostro and vostro accounts, explained in nostro and vostro accounts explained.

  1. The sender asks their bank to pay a recipient abroad, in the sender's or the recipient's currency.
  2. The bank converts the currency, or passes the instruction on to a bank that will.
  3. One or more correspondent banks pass the message along and move balances between their accounts.
  4. The recipient's bank receives the funds and credits the account, often after its own compliance checks.

Why are cross-border payments slow?

Cross-border payments are slow mainly because of the last mile and the checks along the way, not because the message is slow. Swift reported in October 2024 that about 90% of payments on its network reach the destination bank within an hour, while only 43% reach the end customer's account within an hour (Swift press release, 17 October 2024). BIS Working Paper 1385 repeats the 90% figure and notes that most delay sits in the last mile.

The causes stack up. Each hop runs its own sanctions and anti-money-laundering checks. Banks cut off at different times and in different time zones, so a payment can wait for the next banking day. Correspondent banking is often described as settling on a T+1 to T+3 basis, according to the BIS paper. Our deeper breakdown is in why cross-border payments are slow.

Why are cross-border payments expensive?

They are expensive because several parties take a margin and the largest one, the exchange-rate markup, is hard to see. According to BIS Working Paper 1385 (October 2026), retail FX wires at large global banks carry markups of 200 to 400 basis points even on the most liquid pairs. The paper treats that as a lower bound on total cost because it excludes explicit wire fees, and it gives no figure for those fees.

The same paper compares providers. All figures below come from it, and the base is US-outbound payments.

Route (BIS WP 1385)Typical costNotes
Large global bank, retail FX wire200 to 400 bps markup, plus feesMarkup alone, even on liquid pairs
Fintech money transfer operator, $200 paymentAbout 200 bps (Tier 1) to nearly 300 bps (Tier 4)Fixed costs weigh more on small amounts
Fintech money transfer operator, $10,000 paymentAbout 40 to 60 bps (Tier 1 and 2), 80 to 130 bps (Tier 3 and 4)Scale economies
B2B fintech platform wireAbout 83 bps (Tier 1), about 96 bps (Tier 2), plus a fixed $8 wire feeTier 3 and 4 above 300 bps

A basis point (bps) is one hundredth of a percent, so 100 bps is 1%. The tiers group currencies by liquidity, with Tier 1 the most liquid. For more on how fees stack up, see cross-border payment costs beyond the rail.

What does that mean for a $10,000 payment?

This is an illustrative calculation using the BIS ranges, not a quote from any provider. On $10,000, a 200 to 400 bps markup is $200 to $400 before wire fees. A fintech route at 40 to 60 bps is $40 to $60. The G20's 1% average target equals $100.

What are the G20 targets?

The G20 targets, set through the Financial Stability Board (FSB), aim to make cross-border payments cheaper, faster, more accessible and more transparent. The table lists them as shown on the FSB targets page (last updated 13 October 2026).

TargetSegmentGoalDeadline
CostRetail paymentsGlobal average of no more than 1%, no corridor above 3%End-2027
CostRemittancesGlobal average of no more than 3% for sending $200, no corridor above 5%2030
SpeedWholesale, retail, remittances75% of payments within one hour, the rest within one business dayEnd-2027
AccessRetail and remittancesEvery end user has at least one electronic option (retail); over 90% of people who want to send or receive have one (remittances)End-2027
TransparencyAll providersDisclose total cost, expected delivery time, status tracking and termsEnd-2027

The FSB sets no wholesale cost target. Our summary of the scorecard is in G20 cross-border payment targets for 2027.

What is changing?

The FSB published its consolidated progress report for 2026 on 16 November 2026. Its central findings are that the FSB, the Committee on Payments and Market Infrastructures and partners have largely completed the international policy work of the 2020 Roadmap, and that progress on cost, speed, access and transparency is gradual and uneven across regions and segments. We do not quote its figures here, because the report page does not state them in text.

Three themes drive the work now: interoperability and extension of payment systems, legal, regulatory and supervisory frameworks, and cross-border data exchange and message standards. Meanwhile, the BIS paper describes competing rails. Fintechs and, in some corridors, stablecoins are cutting the number of hops. Its stablecoin cost model has four parts: the FX leg, exchange trading fees, network gas and fiat on-ramp and off-ramp fees. FX cost is close to zero for major currencies, and gas is well below one dollar on Ethereum and a few cents or less on other chains. Liquidity is the limit: about $185 million a day of USD stablecoin against EUR trades on centralized exchanges, versus about $2.7 trillion a day in traditional EUR FX turnover.

How do you pick a route for a business payment?

Pick the route by the amount the recipient receives, the speed they need and the proof you need to keep. Use this list for each corridor.

  1. Write down the corridor, the amount and the currency pair, for example $10,000 USD to BRL.
  2. Ask each provider for a full quote for that exact payment, including FX rate, fees and any recipient-side charges.
  3. Compute the delivered amount: what lands in the recipient's account. This is the only comparison that holds up. See cost per delivered dollar.
  4. Check the last mile. Does the payment end on a local rail such as Pix or SPEI, or does it hop through correspondents?
  5. Check tracking and fees disclosure. Look for a status you can follow, and a total cost before you commit.
  6. Check compliance. Who runs sanctions screening and travel rule checks, and how do they handle requests for information?
  7. Send a small test payment before you move volume.

What practical options do businesses have?

There are four practical options, and they differ in hops, speed and transparency. Our SWIFT vs local rails vs stablecoin comparison goes further on each.

OptionHow it moves moneyStrengthWatch for
Bank wire over SwiftMessage plus correspondent settlementReaches almost any bankFX markup and unclear total cost
Fintech transfer providerLocal payout networks in several countriesLower cost on large amountsCoverage by corridor
Local rail at the last mileDomestic instant or bank rail in the destination countryFast, cheap final legNeeds a funded route to reach the rail
Stablecoin-funded payoutDollars move as a stablecoin, then convert to a local bank railFewer hops, quote before you commitOff-ramp quality and compliance

How BlindPay approaches cross-border payments

BlindPay uses stablecoins for the cross-border leg and local rails for the last mile, with compliance inside the same API call. Local rails include Pix in Brazil, SPEI in Mexico, ACH and RTP in the United States and SEPA in Europe. For supplier payments in more than 100 countries, BlindPay sends SWIFT (POBO/COBO) payments, which are payments and collections on behalf of others, with UETR tracking and MT103 confirmations.

BlindPay states on its global payments page that businesses can "save up to 80% on global transfers". Treat that as a BlindPay marketing claim, not a benchmark. As an illustration only: if a bank wire cost a business $300 in fees and markup on a payment, a saving of 80% would leave $60 of cost. Your result depends on the corridor, amount and rail, and the live quote before execute shows the real number.

BlindPay combines a monthly plan (platform access) with per-transaction fees that vary by rail and network and are disclosed only in the live quote before execute. Plans are listed on the pricing page. Documented timings are Pix instant (up to 5 minutes to confirm), SPEI instant (up to 10 minutes), RTP instant, and SWIFT send about 5 business days (BlindPay docs overview). To go deeper on paying into Latin America, read how to send payments to Latin America.

Methodology and sources

All sources were checked in November 2026. External sources:

BlindPay sources: the docs overview, the global payments page and the pricing page. Dollar examples are illustrative.

This article is for general information only and is not legal, tax, or compliance advice.

FAQ

One API.
Multiple payment rails.

Blind Pay, Inc. (“BlindPay”) is a United States-based financial technology and payments infrastructure company, incorporated in the State of Delaware on May 2, 2024. BlindPay is duly registered as a Money Services Business (“MSB”) with the Financial Crimes Enforcement Network (“FinCEN”) under registration number 31000277566153. BlindPay is not a state-licensed money transmitter and does not, in its own capacity, engage in regulated money transmission services. All such regulated activities are conducted exclusively through, and under the licenses of, duly authorized financial institution partners. BlindPay's role is limited to providing financial technology, virtual account management, payment processing, and related payments infrastructure services that facilitate payment flows and account functionalities. These services are provided in coordination with its licensed partners and in compliance with applicable federal MSB requirements and relevant state regulatory frameworks.

Blind Pay, LLC (“BlindPay”) is a Delaware limited liability company formed on June 24, 2025. BlindPay is duly registered as a Money Services Business (“MSB”) with the Financial Crimes Enforcement Network (“FinCEN”) under registration number 31000318334247 and is listed in the Nationwide Multistate Licensing System (“NMLS”) under NMLS ID #2745309.

BLIND PAY SOCIEDADE PRESTADORA DE SERVIÇOS DE ATIVOS VIRTUAIS LTDA. (“BlindPay”) is a Virtual Asset Service Provider (“VASP”) operating in Brazil. The company is presently completing the regulatory adaptation process required of Virtual Asset Service Provider Companies (SPSAV) under Central Bank of Brazil Resolution No. 520/2025, and remains subject to the transitional regime set forth in Article 88 of that Resolution. Registered address: Avenida Princesa Isabel, nº 15, Sala 1405, Edifício Martinho de Freitas, Centro, Vitória/ES, 29010-361.

BlindPay is a stablecoin API that enables individuals and businesses to move money worldwide.