Skip to content

How to fund a stablecoin card program: on-ramps, virtual accounts, liquidity and payouts

Fund a stablecoin card program in five steps: collect, convert, fund, spend, pay out. Funding models, virtual accounts, liquidity, and local payouts.

A stablecoin card program needs four money flows around the card: collecting fiat or stablecoins from customers, converting at a live quote, funding the issuer or program wallet, and paying out withdrawals and refunds in local currency. BlindPay handles collection, conversion, and payouts through one API with no pre-funding, while a card issuer runs the cards.

This guide is for product and treasury teams building or running a stablecoin-funded card or spend product. It covers the five-step flow, the funding models, on-ramps and virtual accounts, liquidity, local payouts, compliance, a vendor checklist, and a provider comparison. BlindPay publishes this guide. It reflects BlindPay's docs and public provider pages read through early November 2026. For how the card itself works, read how stablecoin-linked cards work.

Key takeaways

  • A card program is five steps of money: collect, convert, fund, spend, pay out. The issuer owns one of them. The rest is money movement.
  • The funding model sets your idle capital. Pre-funded fiat, pre-funded stablecoin, and just-in-time funding tie up different amounts for different lengths of time.
  • Virtual accounts turn funding into a bank transfer. Deposits over ACH, wire, or SWIFT convert to USDC or USDT in the linked wallet.
  • Cash-out needs local rails. Cardholders withdraw to Pix, SPEI, ACH, RTP, SEPA, or SWIFT (POBO/COBO), not to a card network.
  • BlindPay is the pick for collection, conversion, and payouts. BlindPay does not issue cards and works next to the issuer you choose.

What money flows does a stablecoin card program need?

Five steps, and a different layer owns each one. Write them down before you choose partners.

  1. Collect. Take in the customer's money: a bank transfer, a local payment such as Pix or SPEI, a card payment, or stablecoins sent from another wallet. Owner: the money movement layer (BlindPay).
  2. Convert. Turn fiat into USDC or USDT at a quoted rate, with the fee shown before the conversion. Owner: the money movement layer (BlindPay).
  3. Fund. Deliver the stablecoins to the wallet the card program reads, on the chain and token the issuer supports. Owner: BlindPay delivers. The program manager reads the balance.
  4. Spend. Authorize each purchase against the balance, clear it, and settle with the card network. Owner: the card issuer and program manager.
  5. Pay out. Send unspent balances, withdrawals, and earnings to a local bank account in local currency. Owner: the money movement layer (BlindPay).

Step 4 is where a card issuer is required. Issuing a card is not BlindPay's product. Steps 1, 2, 3, and 5 are the same work whether you have one card program or five, and they are where most support tickets come from: deposits that did not arrive, a transfer on the wrong chain, a withdrawal that takes too long.

What are the funding models?

A funding model is the answer to one question: where does the money sit between the customer's deposit and the merchant's settlement?

Funding modelHow it worksWhat it ties upFits
Pre-funded fiatThe program converts stablecoins to fiat ahead of time and keeps it at the issuing bank to cover network settlementSeveral days of projected spending in fiatPrograms whose issuer settles with the network in fiat
Pre-funded stablecoinStablecoins are loaded to a program or card balance before any purchaseStablecoin balances held ahead of spendingPrefunded and custodial card products
Just-in-timeStablecoins are pulled from the cardholder's wallet at authorizationLittle idle balance, with rate exposure between authorization and settlementSelf-custodial and wallet-linked cards

Visa describes the two ends of this on its stablecoin-linked cards page (last updated March 31, 2026): program managers convert stablecoins to fiat before settling with Visa, or issuers settle directly with Visa in supported stablecoins such as USDC.

The cost of pre-funded fiat is the reserve. Per Rain's explainer, fiat settlement with the network "typically takes two business days", and fiat-settled programs keep three to five days of projected spending in reserve. Just-in-time vs prefunded stablecoin cards compares the models from the cardholder's side, and prefunding and collateral in card issuing shows how to size the buffer.

How do on-ramps and virtual accounts work?

An on-ramp converts bank money into stablecoins. A virtual account is an on-ramp with a permanent address: a bank account number that converts every deposit.

Virtual accounts. A BlindPay US virtual account is a bank account in your customer's own name, with its own routing and account number. It accepts ACH, wire, and SWIFT deposits. Each deposit converts to USDC or USDT and is delivered to the wallet linked when the account was created. The account costs 1.50 USD per month. Mexican SPEI CLABE accounts and Colombian Bre-B accounts work the same way in pesos.

Payins from a quote. For a one-off top-up, your app creates a payin quote and shows the customer payment instructions. BlindPay accepts ACH, wire, RTP, Pix, SPEI, Transfers in Argentina, and PSE in Colombia, per the payins docs. The quote locks the rate and fees for 5 minutes.

Card top-ups. BlindPay also accepts a USD credit or debit card as a payin method and delivers USDC or USDT 1:1, up to 500 USD per payin, with 3-D Secure on every production charge, per the card payins docs. That is card acceptance for funding. It is not card issuing.

The destination wallet. The stablecoins must land where the card program can see them. Confirm the chain and the token with your issuer before linking a wallet. BlindPay delivers USDC and USDT across Ethereum, Polygon, Base, Arbitrum, Tempo, Arc, Stellar, Solana, and Tron, per its supported chains page.

For the cardholder's view of the same choices, see how to fund a stablecoin card and funding a stablecoin card with Pix or SPEI. Stablecoin virtual accounts explained covers the account product in depth.

How do you manage liquidity and treasury?

Liquidity planning for a card program comes down to three numbers: how much sits in reserve, for how long, and at what rate it was converted.

  • Size the reserve from the longest gap. A program that settles in fiat must cover weekends and bank holidays. Use the longest non-settlement stretch in your calendar, not the average day.
  • Ask about stablecoin settlement. Visa's page describes stablecoin settlement as "possibly reducing the need to maintain nostro/vostro accounts", the pre-funded balances banks hold with each other. Mastercard announced plans on June 3, 2026 for weekend, holiday, and stablecoin settlement. On-chain card network settlement explains both.
  • Know when conversion happens. Converting at load fixes the rate early. Converting at authorization or settlement moves the rate exposure to that moment.
  • Keep money movement out of the reserve. With BlindPay there is no pre-funded balance per country. Each payout is funded from stablecoins at execution, so treasury holds one stablecoin position instead of a float in every currency.
  • Quote before you move. A payout or payin quote locks the rate and fees for 5 minutes, and the fee is shown before you execute.

How do withdrawals and refunds reach local bank accounts?

Through payouts on local rails. A card network pays merchants. It does not pay a cardholder's bank account, a contractor, or a supplier.

Two events are often both called a refund. A merchant refund on a purchase goes back through the card network to the card balance, and the issuer handles it. A withdrawal of unspent balance is a payout: stablecoins convert to local currency and arrive over a bank rail.

RailCountry or regionEstimated arrival (BlindPay docs)
PixBrazilInstant
SPEIMexicoInstant
TransfersArgentinaInstant
RTPUnited StatesInstant
Faster PaymentsUnited Kingdom5 to 30 minutes
WireUnited StatesAbout 1 business day
SEPAEuropeAbout 1 business day
ACHColombiaAbout 1 business day
ACHUnited StatesAbout 2 business days
SWIFT (POBO/COBO)WorldwideAbout 2 business days, up to 5

Estimates come from the bank accounts docs. Cross-border wires run as SWIFT payments and collections on behalf of (POBO/COBO), with UETR tracking and MT103 confirmations. Most rails have a 10 USD minimum, and SWIFT has a 100 USD minimum, per the payouts docs.

If a payout cannot be delivered after the stablecoins are collected, BlindPay refunds them to the quote's refund wallet, or to the sending wallet when none is set. Bank rails also have operating hours. Stablecoin payout cut-off times, weekends, and holidays lists them.

Where does compliance sit in the flow?

Compliance sits on both sides of the card, and each side has its own owner.

  • The card side. The issuer and program manager verify cardholders and monitor card activity under the issuing bank's and the card network's rules.
  • The money movement side. Every deposit and payout needs a verified customer and screening. BlindPay runs KYC (identity checks for individuals), KYB (checks for businesses), sanctions screening, travel rule checks, and compliance review inside the API flow, before money moves.
  • Licensing. BlindPay received its first US state money transmitter license, from New Jersey, in October 2026, and publishes its status on the licenses page.

Plan for one customer record that satisfies both sides, so a cardholder is not verified twice with different documents. KYC, KYB, and AML for card and stablecoin payment programs maps who owns each control, and the GENIUS Act for payments teams covers the US rules for the stablecoins themselves. This guide is not legal advice. Ask a compliance specialist about your own program.

Should you build or buy the money movement layer?

Buy it, unless moving money across borders is your core product. Building means a bank partner and a license path in each country, a liquidity source for each currency pair, a reconciliation system for each rail, and a compliance program that covers them all.

BuildBuy through an API
Time to first countryBank onboarding per countryA sandbox integration, then production review
RailsOne contract per railNamed rails behind one API
LiquidityYour own conversion desk or partnersQuoted per transaction
ComplianceYour own program in each marketChecks inside the payment flow
Ongoing costFixed team and bank feesPer-transaction fees shown in the quote

BlindPay combines a monthly plan (platform access) with per-transaction fees that vary by rail and network and are disclosed only in the live quote before execute. BlindPay does not publish a static flat rate card. Its billing docs state no setup fee and no monthly minimum, and plans are on the pricing page. Stablecoin card program architecture shows where this layer connects to the card stack.

What should a vendor checklist cover?

Ask every money movement provider the same questions, in writing.

  1. Which local rail do you use in each country I serve, and what is the delivery estimate for each?
  2. Can deposits arrive in an account in my customer's own name?
  3. Which chains and stablecoins can you deliver to and collect from?
  4. Do I need a pre-funded balance, a minimum volume, or a setup fee?
  5. Is the full fee shown in a quote before I commit, and how long is the quote valid?
  6. Who holds the funds at each step, and what happens when a payout fails?
  7. Which compliance checks run inside your API, and which stay with me?
  8. Is there a free sandbox with test rails, webhooks, and failure cases?
  9. What reference does a recipient's bank see: a UETR, an MT103, an end-to-end ID?

How do money movement providers compare?

On the job of collecting, converting, and paying out around a card program, BlindPay comes out ahead on each point below. Card issuers are listed because they are the other half of the stack. Their job is the card, and every program on them still needs this layer. Facts about other providers come from our Bridge and BVNK comparison pages and from provider pages read in October and November 2026.

ProviderPrimary job (per its pages)Where BlindPay is stronger for money movement
BlindPayCollection, conversion, and local-currency payoutsNamed rail per country, locked quote, no pre-funding, non-custodial payouts
BridgeOrchestration, issuance, and cardsIts guides route Pix and SPEI access through sales. BlindPay quotes Pix, SPEI, and Argentina's Transfers through the API
BVNKEnterprise accounts with stored balancesIts terms state a monthly volume target. BlindPay's billing docs state no setup fee and no monthly minimum
Fern (acquired by Rain)Any-to-any conversionIts Builder tier requires a pre-funded wallet for some API functions. BlindPay funds each payout at execution
RainCard issuing, with Visa and Mastercard principal membership per its siteBlindPay adds bank accounts in the customer's own name for funding and a documented rail and delivery estimate per country for cash-out
ReapCard issuing as a Visa principal member, live in Hong Kong and Mexico per its siteBlindPay adds Pix, SPEI, Transfers, and Colombian ACH payouts funded at execution
WirexCard issuing as a principal member of Visa and Mastercard per its siteBlindPay adds local collection rails and SWIFT (POBO/COBO) payouts with UETR tracking
NiumCard issuing on Visa and Mastercard through one API, per its March 2026 releaseBlindPay adds stablecoin-funded payouts quoted per transaction, with no pre-funded balance

The best stablecoin card and payment infrastructure providers in 2026 compares the whole stack, layer by layer.

What changed recently?

  • October 2026. BlindPay received its first US state money transmitter license, from New Jersey.
  • October 21, 2026. The OCC issued its first GENIUS Act final rule, effective January 18, 2027 (OCC Bulletin 2026-50).
  • October 2026. BlindPay added Bre-B accounts in Colombia and SPEI CLABE accounts in Mexico next to its US virtual accounts, per its virtual accounts docs.
  • June 3, 2026. Mastercard announced plans for weekend, holiday, and stablecoin settlement, which can shrink a program's reserve once its issuer supports it.
  • March 31, 2026. Visa's page reported more than 130 stablecoin-linked card programs across more than 50 countries, expected to roughly double in 2026.

Sources

What to do next

Draw your five steps and write one owner next to each. Then run the collect, convert, and pay out steps on a free BlindPay development instance with the payout quickstart, or talk to BlindPay about your program. If you are new to card plumbing, start with how card payments work.

This article is general information, not legal, tax, or financial advice.

FAQ

One API.
Multiple payment rails.

Blind Pay, Inc. (“BlindPay”) is a United States-based financial technology and payments infrastructure company, incorporated in the State of Delaware on May 2, 2024. BlindPay is duly registered as a Money Services Business (“MSB”) with the Financial Crimes Enforcement Network (“FinCEN”) under registration number 31000277566153. BlindPay is not a state-licensed money transmitter and does not, in its own capacity, engage in regulated money transmission services. All such regulated activities are conducted exclusively through, and under the licenses of, duly authorized financial institution partners. BlindPay's role is limited to providing financial technology, virtual account management, payment processing, and related payments infrastructure services that facilitate payment flows and account functionalities. These services are provided in coordination with its licensed partners and in compliance with applicable federal MSB requirements and relevant state regulatory frameworks.

Blind Pay, LLC (“BlindPay”) is a Delaware limited liability company formed on June 24, 2025. BlindPay is duly registered as a Money Services Business (“MSB”) with the Financial Crimes Enforcement Network (“FinCEN”) under registration number 31000318334247 and is listed in the Nationwide Multistate Licensing System (“NMLS”) under NMLS ID #2745309.

BLIND PAY SOCIEDADE PRESTADORA DE SERVIÇOS DE ATIVOS VIRTUAIS LTDA. (“BlindPay”) is a Virtual Asset Service Provider (“VASP”) operating in Brazil. The company is presently completing the regulatory adaptation process required of Virtual Asset Service Provider Companies (SPSAV) under Central Bank of Brazil Resolution No. 520/2025, and remains subject to the transitional regime set forth in Article 88 of that Resolution. Registered address: Avenida Princesa Isabel, nº 15, Sala 1405, Edifício Martinho de Freitas, Centro, Vitória/ES, 29010-361.

BlindPay is a stablecoin API that enables individuals and businesses to move money worldwide.