Skip to content

Local acquiring vs cross-border acquiring: costs, approval rates and settlement

Local acquiring processes a card in the cardholder's own country. Compare it with cross-border acquiring on cost, approval rates, settlement and setup.

Local acquiring processes a card payment through an acquirer in the cardholder's own country, so the payment is domestic. It usually brings lower interchange and scheme fees and fewer declines than cross-border acquiring, which is simpler to start but costs more on international cards. An acquirer is the licensed institution that accepts card payments for a merchant.

This guide compares the two models on cost, approval rates, settlement and setup, as of November 2026. BlindPay publishes this guide.

Key takeaways

  • Cross-border acquiring means the acquirer, the merchant and the card issuer sit in different markets. Local acquiring puts the acquirer in the issuer's market.
  • Adyen's Total Cost of Payments report, cited on its site in September 2026, puts average domestic cost at 1.27% and cross-border cost through one home-market acquirer at 3.07%.
  • In a 2022 PSE Consulting deck, Germany's domestic approval rate was 94% against 74% cross-border.
  • In the EEA, a regulation caps consumer interchange at 0.2% for debit and 0.3% for credit cards.
  • Local sales still have to travel home or on to suppliers, and that leg is separate from acquiring.

What is local acquiring?

Local acquiring means a card payment is authorized, cleared and settled by an acquirer located in the same country as the card issuer. The shopper's bank sees a domestic transaction from a known local acquirer. Interchange, the fee the merchant's side pays the card issuer's side on each payment, is the domestic rate. Scheme fees, charged by Visa or Mastercard, are domestic too.

The merchant usually does not need a shop in that country. What changes is where the card payment is processed and under which merchant account. For the card flow behind this, read what merchant acquiring is.

What is cross-border acquiring?

Cross-border acquiring is when the acquirer, the merchant and the customer's issuing bank are in different markets. Antom's knowledge base describes it as a way to accept card payments from abroad through one acquiring relationship, without a local presence in each country (undated page, accessed November 2026).

It is the default for most online merchants because setup is quick. You sign one contract and sell worldwide. The cost is paid at the edges: international cards can carry higher fees, and issuers tend to be more cautious with a foreign acquirer. The same Antom page says cross-border transactions can be more likely to be declined or to carry higher costs, without giving figures.

How do they compare on cost, approval rates, settlement and setup?

Local acquiring tends to win on cost and approval rate, while cross-border acquiring wins on speed of setup and breadth. Settlement depends more on the acquirer and the merchant account design than on the model.

Local acquiringCross-border acquiring
Cost on international cardsDomestic interchange and scheme fees applyInternational fees apply, so the total is often higher
Approval rateOften higher, because the issuer sees a domestic acquirerOften lower, because issuers are cautious with foreign acquirers
SettlementLocal currency, in the market where you sell, then you convert or move itUsually your acquirer's main settlement currency
Setup effortHigher: local merchant account, sometimes a local entity, per-market contractsLower: one contract, one integration
Best fitPriority markets with enough volumeNew markets, long tail, testing demand

Two vendor data points show the size of the effect. Adyen's page, dated September 21, 2026, quotes its Total Cost of Payments report: domestic transactions average 1.27% and cross-border transactions through a single home-market acquirer average 3.07%, which Adyen describes as a saving of around 59% in the domestic case. The same page quotes a FlixBus finance manager saying local acquiring reduced bank declines by 21%. Both are vendor-reported, so use them as a direction.

For approvals, the PSE Consulting deck from its December 2022 conference puts domestic approval at 94% in Germany and 85% in France, with cross-border rates of 74% and 78%. These figures are from 2022. The deck gives no later update, and I found no independent current study, so measure your own gap (see the recipe below).

What are the three ways to get local acquiring?

There are three routes: open a local entity and merchant account, use a provider that processes locally for you, or stay cross-border. Most merchants mix them, using local routes in priority markets and cross-border elsewhere. Antom's knowledge base notes that many merchants combine both.

  1. Own local entity and merchant account. You contract directly with an acquirer in the country. This gives the most control and usually the best domestic pricing, but it takes the longest. You also take on local tax, banking and reporting work.
  2. Local processing through a provider. A provider with its own local acquiring connections routes your payments through them. You keep one contract and one integration. Ask which markets are truly local and which are routed cross-border behind the scenes.
  3. Cross-border by default. One acquirer, one currency, worldwide cards. It is the fastest start. It is also the model where the cost and approval gaps in the table above show up.

A practical rule: start cross-border, find the two or three markets where you sell most and where declines or fees look worst, and move those first. Do not open a local entity for a market you cannot yet measure. If you are weighing providers, how to choose a merchant acquirer lists the questions to ask.

What do EU interchange caps mean for the comparison?

The EU Interchange Fee Regulation caps interchange on consumer debit cards at 0.2% of the transaction value and on consumer credit cards at 0.3%. Osborne Clarke's note on the regulation, published May 22, 2015, states the caps and says they apply from December 9, 2015. Member States may set lower caps for domestic cards. Commercial cards are outside the caps.

I could not open the regulation text on EUR-Lex from my tooling, so the figures here rest on that dated secondary source. Check the official text at the EUR-Lex entry for Regulation (EU) 2015/751 before relying on them for a contract or filing.

The caps matter for the comparison in one way. They apply to card payments inside the EEA, between an EEA issuer and an EEA acquirer, as the regulation's scope is usually described. A merchant outside the EEA that sells to European shoppers through a home-market acquirer may not get that capped rate, because the cap is about who issues and who acquires. Under Interchange++ pricing, where the acquirer passes interchange and scheme fees through at cost plus a fixed markup, a local route in the EEA lets the capped interchange flow to you. Under a blended rate, it may not. Ask your acquirer which pricing model applies.

Three-party schemes such as American Express and Diners were treated differently from the four-party Visa and Mastercard schemes in the 2015 rules, per Osborne Clarke. If those cards are a big share of your sales, check each scheme separately. For the fee layers underneath, see merchant acquiring fees: interchange, scheme and markup.

How do I measure the saving on my own traffic?

Pick one market, apply the domestic fee structure from a local quote, and compare it with the effective rate you pay today on that market's cards. The effective rate is total processing cost divided by processed volume. Do this for one market first, not all of them.

The following is a worked example (illustrative). The inputs are Adyen's reported averages, not a quote, and your numbers will differ.

InputValue
Monthly card volume from one market$50,000
Current effective rate, cross-border3.07%
Local quote, domestic1.27%
Current monthly cost$1,535
Local monthly cost$635
Monthly saving$900
Annual saving$10,800

The saving only counts once you subtract what local acquiring adds: a monthly minimum, an extra contract, local compliance work, and the cost of moving the money home. Add those to the local column before you compare.

  1. Export one month of card transactions for the market, with amount, card country, outcome and fees.
  2. Compute your effective rate: total fees divided by approved volume.
  3. Ask a local acquirer for a quote on the same traffic: interchange, scheme fees and markup.
  4. Compare approval rates: approved attempts divided by all attempts, for the same card countries.
  5. Add the one-off and monthly costs of the local route, then decide.

For the approval side, how to improve card authorization rates covers the levers that do not require a new acquirer.

How do I get money from local markets back to my home account?

Local acquiring ends at the settlement account in the local currency, so you need a second step to get proceeds home or to pay local suppliers. Options are an FX conversion by your acquirer, a bank wire from the local account, or a settlement and payout provider that moves funds across borders.

This is the leg BlindPay covers, and it complements a local acquirer instead of replacing one. BlindPay is not a card acquirer, a payment gateway or a bank. It has no merchant IDs and does not set interchange. The acquirer takes the card payment. BlindPay moves money across borders, pays sellers, suppliers and contractors in local currency, and collects bank transfers.

What that looks like in practice:

  • Payouts in local currency. BlindPay sends payouts over local rails: Pix and TED in Brazil, SPEI in Mexico, ACH Colombia, Transfers 3.0 in Argentina, ACH, wire and RTP in the US, SEPA in Europe, Faster Payments in the UK, and SWIFT (POBO/COBO) elsewhere, with UETR tracking and MT103 confirmations. The recipient needs only a bank account.
  • Live quotes. Each quote shows the rate and the full fee breakdown before you execute, and locks them for 5 minutes by default.
  • No pre-funding. Payouts are funded at execution, so you do not park a balance in each country.
  • US virtual accounts. A US virtual account is a real US bank account in your name that takes ACH, wire or SWIFT deposits and settles them to USDC or USDT in a linked wallet. If a local acquirer pays out to a bank account by one of those methods, that account can be the destination. Confirm the payout method with your acquirer.

BlindPay's billing docs state no setup fee and no monthly minimum. Per-transaction fees vary by rail and network and appear in the live quote before you execute. For how multi-currency flows lose margin, read multi-currency settlement and FX margin. For paying sellers abroad, read cross-border payouts for marketplace sellers and contractors. Platforms that settle in stablecoins can see how acquirers and platforms use stablecoin settlement and stablecoin settlement for merchants. For the local methods that sit beside cards, see payment methods in Latin America.

Methodology and sources

What to do next

Work out your worst-performing market with the recipe above, then read multi-currency settlement and FX margin to see what the money costs to move once it settles. To scope the settlement and payout leg for your markets, talk to the BlindPay team.

This article is general information, not legal, tax, or financial advice.

FAQ

One API.
Multiple payment rails.

Blind Pay, Inc. (“BlindPay”) is a United States-based financial technology and payments infrastructure company, incorporated in the State of Delaware on May 2, 2024. BlindPay is duly registered as a Money Services Business (“MSB”) with the Financial Crimes Enforcement Network (“FinCEN”) under registration number 31000277566153. BlindPay is not a state-licensed money transmitter and does not, in its own capacity, engage in regulated money transmission services. All such regulated activities are conducted exclusively through, and under the licenses of, duly authorized financial institution partners. BlindPay's role is limited to providing financial technology, virtual account management, payment processing, and related payments infrastructure services that facilitate payment flows and account functionalities. These services are provided in coordination with its licensed partners and in compliance with applicable federal MSB requirements and relevant state regulatory frameworks.

Blind Pay, LLC (“BlindPay”) is a Delaware limited liability company formed on June 24, 2025. BlindPay is duly registered as a Money Services Business (“MSB”) with the Financial Crimes Enforcement Network (“FinCEN”) under registration number 31000318334247 and is listed in the Nationwide Multistate Licensing System (“NMLS”) under NMLS ID #2745309.

BLIND PAY SOCIEDADE PRESTADORA DE SERVIÇOS DE ATIVOS VIRTUAIS LTDA. (“BlindPay”) is a Virtual Asset Service Provider (“VASP”) operating in Brazil. The company is presently completing the regulatory adaptation process required of Virtual Asset Service Provider Companies (SPSAV) under Central Bank of Brazil Resolution No. 520/2025, and remains subject to the transitional regime set forth in Article 88 of that Resolution. Registered address: Avenida Princesa Isabel, nº 15, Sala 1405, Edifício Martinho de Freitas, Centro, Vitória/ES, 29010-361.

BlindPay is a stablecoin API that enables individuals and businesses to move money worldwide.