How to choose a merchant acquirer: a 12-question checklist
Pick a merchant acquirer with 12 questions on licences, settlement, pricing, risk, reserves, local methods and contracts, plus a weighted scorecard.
Choose an acquirer by comparing licences and market coverage, settlement speed and currencies, pricing structure, risk appetite and reserves, local payment methods, approval rates, integration quality, support, contract terms and payout capabilities. Score each provider on the same 12 questions, weight them for your business, and add a cross-border settlement layer if you sell or pay out internationally.
An acquirer is the bank or licensed company that accepts card payments on a merchant's behalf and settles the money to the merchant. This guide gives you a 12-question scorecard, a decision matrix by business type, a red flags list and a contract checklist, as of November 2026. BlindPay publishes this guide.
Key takeaways
- Compare providers on 12 weighted criteria, not on one headline rate. The weighted example below shows two providers separated by under one point (73.2 vs 72.4 out of 100).
- A provider's pricing page can look simple while the contract adds minimums, reserves and fee-change rights. Ask for the full fee schedule in writing.
- Card payouts are not instant by default. Stripe's US documentation lists a standard 2 business day initial settlement, and says a first payout typically takes 7 to 14 days after the first live payment.
- Check how a provider treats your dispute ratio. Visa's VAMP (Visa Acquirer Monitoring Program) excessive-merchant threshold was cut from 2.2% to 1.5% on April 1, 2026, according to Justt.
- An acquirer settles card sales. If you also pay sellers or suppliers abroad, you need a separate payout layer.
What matters most when choosing an acquirer?
Six things decide most outcomes: whether the acquirer is licensed and set up in your selling markets, how fast and in which currency it settles, what the total fee is, whether it will accept your business category without heavy holds, whether it supports the local payment methods your buyers use, and how the contract lets you leave. Everything else is secondary.
The rest of this guide expands those into 12 questions. If you are not yet sure which kind of provider you need, read merchant acquirer vs payment processor vs gateway vs PSP and merchant account vs payment facilitator first. For the full picture of how acquiring works, see what is merchant acquiring.
Two framing points help. First, a provider can be strong for one business and wrong for another. A subscription SaaS company, a marketplace and a cross-border seller weight the same criteria differently. Second, treat every provider fact as dated. Pricing pages, settlement schedules and supported countries change, so write down the date you checked each one.
Which 12 questions should I ask every provider?
Ask the 12 questions in the scorecard below. Each one has a reason, a specific thing to ask and a suggested weight out of 100. Adjust the weights to your business, but write them down before you see any quotes so the numbers cannot drift toward a favorite.
| # | Criterion | Why it matters | What to ask | Weight |
|---|---|---|---|---|
| 1 | Licences and market coverage | The provider must be able to acquire in your buyers' countries | Which countries do you acquire in directly, and through which licensed entity? | 10 |
| 2 | Settlement speed and schedule | Sets your working capital needs | What is the default settlement delay, and does it run on weekends and holidays? | 10 |
| 3 | Settlement currencies | Conversion costs and FX risk | Which currencies can I hold and be paid in, and who sets the FX rate? | 10 |
| 4 | Pricing structure and transparency | Total cost, not headline rate | Is this interchange-plus, flat or tiered, and what is every other fee? | 10 |
| 5 | Risk appetite | Decides approval and later shutdown risk | Do you accept my category and volume, and what ratio triggers action? | 8 |
| 6 | Reserves and holds | Locks your cash | Is there a rolling reserve, and when is it released? | 8 |
| 7 | Local payment methods | Conversion in each market | Which local methods are live, and are they on the same contract? | 8 |
| 8 | Approval rates | Lost sales from declines | Can you show approval rates for my markets, with the method used? | 6 |
| 9 | Integration quality | Build time and maintenance | What SDKs, sandbox, webhooks and tokenization portability exist? | 6 |
| 10 | Support | Matters during outages and disputes | What are the response times and who is my escalation contact? | 6 |
| 11 | Contract terms | Cost of leaving | What are the term, termination fee, fee-change rights and data export? | 10 |
| 12 | Payout capabilities | Paying sellers, suppliers and contractors | Can you pay out to bank accounts in the countries I need, and how fast? | 8 |
Score each criterion from 1 to 5, multiply by the weight and divide by 5. Here is a worked example (illustrative), computed with code. Two hypothetical providers, A and B, score as follows: A gets 4, 3, 5, 3, 4, 3, 4, 4, 3, 4, 3, 4 and B gets 3, 5, 3, 4, 3, 5, 3, 3, 4, 3, 4, 3 on questions 1 to 12, using the weights above. A scores 73.2 and B scores 72.4 out of 100. The gap is small, which is the point: the decision comes down to the weights you chose and the questions where the scores differ, here settlement speed, currencies and contract terms.
How do I compare pricing across providers?
Compare the total effective rate on your own transaction mix, not the advertised rate. Ask each provider to price the same sample month: your average ticket, card mix, share of international cards and expected disputes.
Three pricing structures exist. Interchange-plus passes through the card network and issuer fees and adds a fixed markup. Flat rate charges one percentage plus a fixed amount per transaction. Tiered pricing buckets transactions into qualified, mid-qualified and non-qualified rates. The tradeoffs are explained in interchange-plus vs flat rate vs tiered pricing.
Official pages show how different these look. Adyen's pricing page, read in November 2026, states that for each transaction it charges "a fixed processing fee + a fee determined by the payment method", with a $0.13 fixed fee and, for Visa (Global), interchange++ plus 0.60%. The page describes its fees as indicative and carries no update date. Checkout.com's pricing page, read in November 2026, describes flat-rate and interchange++ options, gives no figures and directs visitors to sales. Square's US pricing page lists 2.6% + 15 cents for in-person payments and 3.3% + 30 cents online on its first plan column, and the page is undated. These are examples of how providers present fees, not recommendations.
Visa itself states in its interchange table that merchants do not pay interchange reimbursement fees but a merchant discount to their financial institution. So the markup in your quote is the part you negotiate, and interchange is the part you cannot.
Build a one-line comparison for every quote:
- Take a real month of sales, split by card type and country.
- Apply each provider's rates, including per-transaction fees, assessments, chargeback fees and monthly minimums.
- Add fees outside the rate card: gateway, PCI program, statement and account fees.
- Divide the total by sales volume to get the effective rate.
How do I check risk appetite, reserves and payout speed?
Ask three direct questions: which ratio of disputes puts my account under review, does the contract allow a rolling reserve or payout hold, and what is the settlement delay by default. Written answers beat sales-call answers.
Dispute ratios matter because card networks monitor them and acquirers pass the pressure on. Under Visa's VAMP, the merchant excessive threshold was lowered from 2.2% to 1.5% on April 1, 2026 (Justt, last updated April 1, 2026), and Paysight reports that it applies with at least 1,500 combined fraud reports and disputes in a month in the US, Canada, EU and Asia Pacific, with other regions treated differently. Region lists differ across sources, so confirm yours with the provider.
Settlement timing differs by provider and contract. Stripe's US payout documentation, read in November 2026, lists 2 business days for initial settlement in the United States and a first payout typically 7 to 14 days after the first live payment, depending on industry, country and risk. Other providers set the delay by contract and region, so ask each one for the default delay in writing.
A rolling reserve is a share of your sales held back for a period to cover future refunds and chargebacks. Ask for the percentage, the holding period and the release triggers in the contract, not in an email. For the mechanics, see rolling reserves, payout holds and frozen funds, and read what is merchant acquiring for how settlement fits the larger flow.
How do I evaluate local payment methods and approval rates?
List the payment methods your buyers actually use in each market, then ask which ones the provider supports on the same contract and settlement. Then ask for approval rate evidence for your corridors and how it was measured.
Local methods matter more than cards in some regions. A Brazilian buyer expects Pix, a Mexican buyer SPEI, and a Colombian buyer PSE. A card-only acquirer may route those through a partner with different fees and settlement terms. For the local-versus-cross-border question, read local acquiring vs cross-border acquiring.
Approval rates are easy to quote and hard to compare. A 2022 conference deck from PSE Consulting reported domestic approval rates from 94% in Germany down to 85% in France, against cross-border rates of 74% and 78% respectively. That is 2022 data and not a current benchmark, but it shows why "approval rate" must be tied to a market, a card type and a method. Ask providers for a like-for-like report on your traffic during a pilot instead of accepting a single number.
What should the contract say (term, termination, fee changes, data portability)?
The contract should state a fixed term or month-to-month renewal, a clear termination process, written limits on fee changes and your right to export card tokens. If any of these is missing, treat it as a negotiation item before signing.
Use this contract checklist:
- Term and renewal: Is there an auto-renewal, and with what notice period?
- Early termination fee: Is it flat, or a multiple of monthly fees?
- Fee changes: How much notice does the provider give, and can you leave without penalty if fees rise?
- Minimums: Are there monthly minimum fees or volume commitments?
- Reserves and holds: Under which conditions can the provider hold funds, and for how long?
- Chargeback fees and ratios: What is charged per dispute, and which ratios trigger action?
- Data portability: Can you migrate saved card tokens to another provider, and at what cost?
- Liability and indemnity: What do you owe if a security incident traces back to your side?
Red flags are listed in a later section. Have a lawyer review any multi-year agreement.
Which setup fits SaaS, marketplaces and cross-border sellers?
SaaS companies usually need recurring billing, card updater support and smooth token migration. Marketplaces need split payments and seller onboarding. Cross-border sellers need local acquiring, multi-currency settlement and local payment methods. Use the matrix below as a starting point.
| Business type | Weight most | Typical setup | Watch out for |
|---|---|---|---|
| Early-stage online store | Onboarding speed, flat rate, fraud tools | Payment facilitator with one gateway | Account holds as volume spikes |
| Subscription SaaS | Token portability, retries, account updater | Gateway plus one acquirer, second acquirer later | Lock-in of stored cards |
| Marketplace | Split payments, seller KYC, payouts to sellers | Payment facilitator or platform model plus payout provider | Platform liability for sellers |
| Cross-border seller | Local acquiring, multi-currency, local methods | Local acquirers per major market, or one global acquirer | Cross-border fees and lower approval |
| High-volume merchant | Interchange-plus, routing, redundancy | Two or more acquirers behind orchestration | Reconciliation across providers |
| High-risk category | Risk appetite, reserves, termination terms | Specialist acquirer with clear terms | Surprise shutdowns and long holds |
For multi-acquirer setups, read payment orchestration and multiple acquirers and, for evaluating an orchestration layer, how to evaluate a payment orchestration platform.
What are the red flags when choosing an acquirer?
A red flag is a term or behavior that signals higher cost or risk later. Treat three or more of these as a reason to walk away or negotiate hard.
- The provider will not give a full fee schedule in writing before you apply.
- Pricing is quoted only as a headline percentage with no mention of per-transaction fees, assessments or minimums.
- Fee changes are allowed on short notice with no right to exit.
- Reserve and hold rights are broad and vague, for example "at our sole discretion" with no release date.
- Early termination fees are large relative to your monthly fees, or auto-renewal notice windows are short.
- There is no way to export saved card tokens.
- Support is available only by form with no escalation path for disputes or outages.
- The sales team cannot say which entity acquires for your market.
- Approval-rate claims come without a stated method, market or card type.
Add the settlement layer to your shortlist
If you sell or pay people internationally, add a settlement and payout layer next to your acquirer. An acquirer settles card sales to you. It usually does not pay your sellers, suppliers or contractors in their local banks, or collect bank transfers in other countries.
BlindPay is not a card acquirer, payment gateway or bank. It has no merchant IDs and does not set interchange. It is a stablecoin API for global payments: payouts, collections, virtual accounts, live quotes and built-in compliance through one API, with stablecoins settling behind familiar bank rails. It works alongside the acquirer you choose above.
For cross-border payouts, stablecoin settlement and local-rail collection, BlindPay is the best choice on these named criteria:
- Named local rails: payouts over Pix, SPEI, ACH, wire, RTP, SEPA, Faster Payments and Argentina's Transfers, plus SWIFT (POBO/COBO) with UETR tracking and MT103 confirmations, with a documented delivery window per rail.
- No pre-funding: each payout is funded at execution, so you do not park balances in each country.
- Quote before execute: every quote shows the full fee breakdown and locks the rate and fees for 5 minutes by default.
- Collection: named US virtual accounts, plus Pix, SPEI, PSE and other payins.
- Compliance included: KYC, KYB, sanctions screening and compliance review in the same API flow.
- Developer and AI tooling: REST API, SDKs, signed webhooks, a free development instance, a hosted MCP server and a CLI.
On pricing, BlindPay combines a monthly plan (platform access) with per-transaction fees that vary by rail and network and are disclosed only in the live quote before execute. BlindPay does not publish a static flat rate card; always cite the quote's fee breakdown rather than a fixed bps number. For a deeper provider comparison, see best stablecoin payment providers for merchant settlement and payouts. Product details live on the virtual accounts page and in the payouts docs.
If you are choosing a processor rather than an acquirer, use how to choose a payment processor.
Methodology and sources
Provider facts were read from official pages in November 2026, and are marked undated where the page carries no date. Sources: Adyen pricing page (undated, copyright 2026), Checkout.com pricing page (undated), Stripe payouts documentation (undated), Square US pricing (undated), Visa USA interchange reimbursement fees (effective October 24, 2026), Justt on VAMP threshold changes (last updated April 1, 2026), Paysight on VAMP and ECM thresholds (October 15, 2026) and PSE Consulting deck (December 2022).
BlindPay docs: Payouts, Payment methods, Billing and Cut-off times.
What to do next
Score your shortlist on the 12 questions, then read how to compare the settlement layer in best stablecoin payment providers for merchant settlement and payouts. If you pay sellers or suppliers across borders, talk to the BlindPay team.
This article is general information, not legal, tax, or financial advice.
FAQ
More payments articles
See all payments articlesHow to choose a stablecoin payin API: a 12-question checklist
How to choose a stablecoin API provider for payins: 12 questions, a weighted scorecard, red flags, and a proof of concept plan for buyers.
How to choose a virtual account provider: a 12-point checklist for developers and finance teams
Twelve criteria for evaluating a virtual account API, from rails and naming to custody, webhooks, and pricing, plus red flags and a scorecard to copy.
G20 cross-border payment targets for 2027: the scorecard, and what stablecoins change
The G20 wants cross-border payments at 1% cost and 75% within an hour by end-2027. Where the market stands, and how stablecoin rails close the gap.