Payment processing pricing models: interchange-plus vs flat-rate vs tiered
Payment processing pricing compared: how interchange-plus, flat-rate and tiered models work, a worked cost example, and how to find your effective rate.
Payment processing pricing comes in three main models. Flat-rate pricing charges one blended rate on every card. Interchange-plus passes interchange and network fees through at cost and adds a fixed processor margin. Tiered pricing sorts transactions into qualified, mid-qualified and non-qualified buckets. Interchange-plus is the most transparent, and flat-rate is the simplest.
This guide shows how each model works, runs the same hypothetical month through all three, and explains how to calculate the one number that lets you compare quotes: your effective rate. It reflects public sources as of November 2026.
Key takeaways
- Every model sits on the same underlying cost. Interchange and network assessments are set by the card networks. The processor's markup is the only part that differs.
- Flat-rate hides the cost mix. You pay the same rate whether the card was cheap or expensive for the processor to accept.
- Interchange-plus shows the markup. It usually costs less at volume, but the statement is longer and monthly fees are common.
- Tiered pricing is the hardest to audit. The processor decides which bucket each transaction falls into.
- Compare effective rates, not headline rates. Effective rate is total fees divided by total card volume.
What are you paying for in card processing?
Every card sale carries three fees. Interchange goes to the bank that issued the card. Assessments, also called scheme fees, go to the card network. The processor's markup goes to the company that handles the transaction for you. Payments30's guide to card payments (updated November 2026) lists the same three layers as interchange, scheme fees and acquirer margin.
Interchange is usually the largest piece, per MannyPay's processing guide (2026). It also varies the most. A debit card from a large bank costs far less than a rewards credit card. The Federal Reserve's 2023 debit card data shows debit transactions covered by its fee cap averaged $0.24 or less in interchange.
A pricing model is the way a processor wraps those three fees into what you see on a quote. The underlying cost is the same in each case. Interchange fees explained covers who sets the first two layers.
How do the three pricing models work?
| Model | How it works | Best for | Watch out for |
|---|---|---|---|
| Flat-rate | One blended percentage, often with a fixed fee per transaction, on every card | New and low-volume businesses that want a predictable cost and no monthly fees | You overpay on debit and small tickets, and the gap grows with volume |
| Interchange-plus | Interchange and assessments passed through at cost, plus a fixed margin | Established businesses with steady volume that want to see and negotiate the margin | Monthly fees, minimums and a statement with many lines |
| Tiered | Transactions sorted into qualified, mid-qualified and non-qualified buckets, each with its own rate | Rarely the best fit. It suits a business only if most of its sales qualify for the lowest bucket | The processor defines the buckets, and can move transactions between them |
Flat-rate pricing
Flat-rate pricing charges one rate for every card. The processor pays interchange and assessments out of that rate and keeps the difference. When a customer pays with a low-cost debit card, the processor keeps more. When a customer pays with a premium rewards card, it keeps less.
The appeal is simplicity. There is one number to remember, and usually no monthly fee. The cost is that you cannot see what the processor earns.
Interchange-plus pricing
Interchange-plus splits the bill in two. The first part is interchange and assessments, passed through at the network's price. The second part is the processor's margin, quoted as a percentage plus a fee per transaction.
The margin stays the same on every sale, so a cheaper card costs you less. That is the sense in which the model is transparent. It also makes the margin easy to negotiate, because it is a separate line.
Tiered pricing
Tiered pricing groups transactions into three buckets. Qualified is the lowest rate. Mid-qualified and non-qualified cost more. The processor decides which cards and which ways of accepting them fall into each bucket.
The quote usually leads with the qualified rate. Your real cost depends on how many sales land in the other two buckets, and that is hard to predict from a quote.
What does the same month cost under each model?
The numbers below are hypothetical. They are chosen to make the arithmetic easy to follow, and they are not market rates or quotes from any processor.
Take a business with $50,000 of card sales in a month across 1,000 transactions, so an average ticket of $50. Assume its cards cost an average of 1.60% plus $0.10 in interchange and 0.14% in assessments. That is $900 of interchange and $70 of assessments, or $970 of underlying cost.
| Model (hypothetical terms) | How the month is billed | Total fees | Effective rate |
|---|---|---|---|
| Flat-rate at 2.90% plus $0.30 | $1,450 plus $300 | $1,750 | 3.50% |
| Tiered: 1.80% on half the volume, 2.50% on 30%, 3.50% on 20%, plus $0.20 per transaction | $450 plus $375 plus $350, plus $200 | $1,375 | 2.75% |
| Interchange-plus at cost plus 0.30% and $0.10 | $970 of cost, plus $150 and $100 of margin | $1,220 | 2.44% |
In this example the processor keeps $780 under flat-rate, $405 under tiered and $250 under interchange-plus. The underlying cost of $970 never changes.
Now shrink the business. A hypothetical shop with $3,000 of card sales across 100 transactions pays $117 under the same flat rate. On the same interchange-plus terms it pays about $81 in transaction fees. Add a hypothetical $30 monthly fee and a $10 monthly compliance fee, and the total is about $121. Flat-rate wins.
That is the general pattern. Fixed monthly fees matter most at low volume, and the percentage gap matters most at high volume.
How do you calculate your effective rate?
Your effective rate is your total processing fees divided by your total card volume. It turns any pricing model into one comparable number.
- Take one full month's statement.
- Add up every fee the processor charged: percentage fees, per-transaction fees, monthly fees, compliance fees and anything else.
- Find the total value of card sales for the same month.
- Divide the fees by the sales and multiply by 100.
A business that paid $1,375 in fees on $50,000 of card sales has an effective rate of 2.75%. Run the same sum for three months, because card mix and refunds move the number.
To compare a new quote, apply its terms to the same months. A lower headline rate can produce a higher effective rate once monthly fees and per-transaction fees are counted.
How do you read a processing statement?
Start with two totals: card volume and fees. Then look for where the fees come from.
On a flat-rate statement there is little else to read. On an interchange-plus statement, look for the pass-through section, which lists interchange categories and assessments, and the separate processor fees. On a tiered statement, look at how much volume landed in each bucket. If most of it is mid-qualified or non-qualified, the advertised rate is not the rate you pay.
Remember that the amount deposited is net. As Syntaqx's payments guide puts it, the acquirer pays the merchant less its own fees and anything it is holding back. A reserve or a held batch is not a fee, so keep it out of the effective rate.
Which pricing model fits which business?
- Starting out or under a few thousand dollars a month. Flat-rate is usually fine. Predictable cost and no fixed fees matter more than the margin.
- Steady volume and a mixed card base. Ask for interchange-plus. You will see the margin and can negotiate it.
- Many debit cards or small tickets. Interchange-plus tends to help most here, because debit interchange is low and a flat percentage ignores that.
- Currently on tiered pricing. Ask for your bucket breakdown, calculate your effective rate, and request an interchange-plus quote to compare.
Who you are actually buying from matters too. A payment facilitator, an acquirer and a gateway bundle these fees differently. Issuer, acquirer, network, processor, gateway and PSP explained maps the roles.
Which contract terms should you check?
The rate is one line of a processing agreement. These terms change the real cost.
- Monthly minimum. A fee charged if your processing fees fall below a set amount.
- Monthly and annual fees. Account, statement, gateway and PCI compliance fees, plus any fee for not completing your PCI questionnaire.
- Early termination fee. What it costs to leave before the term ends, and whether the contract renews automatically.
- Rate-change clause. How much notice the processor must give before it raises rates.
- Chargeback and retrieval fees. A fixed fee each time a customer disputes a sale.
- Funding terms. When you are paid, and whether the processor can hold a reserve.
- Equipment. Whether terminals are bought or leased, and for how long.
Ask for the full fee schedule in writing before you sign. Anything that is not on it should not appear on a statement.
Does surcharging change the picture?
A surcharge passes some of your cost to customers who pay by credit card. It does not lower what the processor charges you. It also depends on your pricing, because network rules tie the surcharge to your cost of acceptance.
Visa's US merchant surcharge Q&A (February 2024) caps a surcharge at your merchant discount rate or 3%, whichever is lower. A proposed settlement between US merchants and Visa and Mastercard would change some surcharging rules. It received preliminary approval in June 2026 and has no final approval. Credit card surcharging in 2026 covers the rules and the state limits.
Sources
- Payments30, "How card payments work", updated November 2026: payments30.com
- MannyPay, "How credit card processing works", 2026: mannypay.io
- Syntaqx, "Card payments", 2026: syntaqx.com
- Federal Reserve, 2023 interchange fee revenue, covered issuer costs and covered issuer and merchant fraud losses: federalreserve.gov
- Visa, US merchant surcharge Q&A, February 2024: usa.visa.com
Every rate and fee in the worked examples is hypothetical. Use your own statements and written quotes for decisions.
What to do next
Work out your effective rate for the last three months, then ask your processor for an interchange-plus quote on the same volume. For the fee layers under every model, read interchange fees explained, and for the full path of a sale, how card payments work. BlindPay publishes this guide. It is a stablecoin payout and collection API, not a card issuer or acquirer, and its plans are on the pricing page.
This article is general information, not legal, tax, or financial advice.
FAQ
More payments articles
See all payments articlesInterchange-plus vs flat rate pricing: which payment processing model is cheapest at your volume?
Interchange-plus beats flat rate once your monthly savings exceed its fixed fee. See the break-even math at three volumes, plus how tiered pricing works.
Interchange-plus vs flat-rate pricing: the break-even volume, with tiered pricing compared
At what monthly volume does interchange-plus beat flat-rate? Break-even tables at $10k, $50k and $250k, two card mixes, tiered pricing, a quote template.
Best real-time cross-border settlement providers for 2027: measured against the one-hour bar
Real-time cross-border settlement providers for 2027, measured against the G20 one-hour target: BlindPay, Wise Platform, Airwallex, Thunes, Bridge, Circle.